Fortune CNC’s production line used to produce up to 800 lathes a month. The first CNC lathe (model C-16, D-24) with Fanuc 2000 control was established in 1980. It was the first flat bed CNC lathe at the time. Today, Victor Taichung has in production over 60 models with up to 100 sets of CNC lathes per month. The chuck sizes are from 6″ to 24″ on the horizontal lathes and from 12″ up to 40″ on the vertical lathes. They are available with optional live tooling, sub-spindle, Y-axis and large spindle bore models. All of them can be integrated with gantry robot, free standing robot or Easyway robot system for factory automation. All the CNC lathes are standard with Fanuc’s latest control, Fanuc spindle motor and servo motor system. Kitagawa chuck (except large spindle bore model), chip conveyor and air conditioner for electrical cabinet. (Vt-NP20,Vt-S26,Vt-V560,Vt-A26)
Horizontal Lathes
| Chuck | 6″ | 8″ | 10″ | 12″ | 15″ ~ 24″ | 18” air chuck |
|---|---|---|---|---|---|---|
| Linear bearings | VTplus-16 | Vturn-P20 | ||||
| (LM guides) | Vturn-X200, Vturn-Q200 | |||||
| New 2017 (linear ways) | Vturn-NP16 | Vturn-NP20 | ||||
| Box Slideways (High rigidity) | Vturn-16,Vturn-A16 | Vturn-20E, Vturn-20, Vturn-20LSB, Vturn-A20 | Vturn-26E, Vturn-26HD, Vturn-A20LSB, Vturn-A26 | Vturn-26HDLSB, Vturn-A36, Vturn-36 | Vturn-36LSB, Vturn-40, Vturn-45, Vturn-46 | Vturn-36LSB, Vturn-45LSB |
| New 2018 (Box ways) | Vturn-S26 | |||||
| C-axis + Live Toolings (VDI or BMT turret) | Vturn-A16CV | Vtrun-A20CV | Vturn-A26CV | Vturn-36CV, Vturn-A36CV | Vturn-36CV, Vturn-40CV, Vturn-45CV, Vturn-46CV | Vturn-36LBSCV, Vturn-45LSBCV |
| New 2018 (Box ways) | Vturn-S26CM | |||||
| Sub-spindle | Vturn-A16SV | Vturn-A20SV | Vturn-A26SV | Vturn-A36SV | ||
| Y-axis | Vturn-A16YCV | Vturn-A20YCV | Vturn-A26YCV | Vturn-A36YCV | ||
| C-axis + Live Toolings (VDI or BMT turret) |
Vturn-A16YSCV | Vtrun-A20YSCV | Vturn-A26YSCV | Vturn-A36YSCV |
Vertical Lathes:
| Chuck | 12”~18” | 18”~32” | 24”~40” |
|---|---|---|---|
| Box Slideways | Vturn-V560 | Vturn-V760 | Vturn-V1000 |
| C-axis + Live Toolings (VDI or BMT turret) | Vturn-V560CV | Vturn-V760CV | Vturn-V1000CM |
Specification:
| Vturn-NP16 | Vturn-NP20 | Vturn-20E | Vturn-S26 | |
|---|---|---|---|---|
| Chuck size | 6″ | 8″ | 8″ | 10″ |
| Spindle nose | A2-5 | A2-6 | A2-6 | A2-8 |
| Bar capacity | 1.65″ | 2.04″ | 2.04″ | 2.95″ |
| Swing over bed dia. | 22.44″ | 25.59″ | 17.72″ | 23.62″ |
| Standard turning dia. | 8.27″ | 8.1″ | 6.3″ | 13.78″ |
| Max. tuning diameter | 12.8″ | 12.6″ | 9.06″ | 11.22″ |
| Max. turning length (Center dist.) | 10.63″ | 25″ | 21.65″ | |
| Z-axis travel | 9.84″ | 15.7″ | 23.62″ | 24″ |
| Guide ways | Roller type linear | Roller type linear | Box ways | Box ways |
| Control (Fanuc) | Oi-TF w/10.4″ | Oi-TF w/10.4″ | Oi-TF type 3 | Oi-TF |
| Rapid feed rate (ipm) | 1181/1181 | 1181/1181 | 472/590 | 708/944 |
| Spindle speed | 6000 | 4200 | 4200 | 3500 |
| Spindle HP | 7.5/10 | 10/15 | 10/15 | 25/30 |
| Spindle (Fanuc) | Beta type | Beta type | Beta type | Alpha type |
| Servo turret | 3 pcs | 3 pcs | 2 pcs | 3 pcs |
| No. of tools | 12 | 13 | 10 (opt.8) | 10 (opt.12) |
| Milling turret | Opt (BMT-45) | Opt (BMT-45) | No | Opt (BMT-65) |
| Servo (Fanuc) | Alpha type | Alpha type | Beta type | Alpha type |
| Chip conveyor | Std | Std | Std | Std |
| Tool shank | 3/4″ | 1″ | 3/4″ | 1″ |
| Tailstock | Optional | Optional | Programmable |
Programmable |
| Machine width | 59″ (opt. 68″) | 76″ (opt.83″) | 100″ | 159″ |
| Machine weight (lb) | 6160 | 8360 | 8800 | 13500 |
| ITEM \ MODEL | Vturn-40/220[Y] Vturn-40/325[Y] | Vturn-45/220 Vturn-45/325 | Vturn-46/165 | Vturn-S36/85(CM) |
| MACHINE CAPACITY | ||||
| Swing over bed mm(inch) | 780(30.71) | 780(30.71) | 820(32.28) | 780 |
| Std. Turning dia. mm(inch) | 520(20.47) | 520(20.47) | 520(20.47) | 480(0452) |
| Max. turning dia. mm(inch) | 620(560) (390 for CV) | 620(24.41) | 730(28.47) | 580(580) |
| Swing over carriage mm(inch) | 620(24.41) | 620(24.41) | 520(20.47) | 600 |
| Center distance mm(inch) | 2165(85.24) 3425(134.84) | 2165(85.24) 3425(134.84) | 1750(68.9) | 898 |
| Bar capacity (hole through draw har) mm(inch) | 91(3.58) | 117.5(4.62) (160(6.3) for LSB) | 115(4.33) | 91(opt. 117.5) |
| AXIS FEEDS | ||||
| X axis travel: -Std turret -VDI turret -VDI turret,C-axis -BMT turret,C-axis mm(inch) | 310+30(12.2+1.18) 125+315(4.92+12.4) 107+165(4.21+6.49) 280+90(11.02+3.54) | 310+30(12.2+1.18) 125+315(4.92+12.4) – – | 365+25(14.37+0.98) 137+303(5.39+11.93) 186+234(7.32+9.21) – | 290+30(270+50) |
| Z axis travel: mm(inch) | 2200(86.61) 3250(127.95) | 2200(86.61) 3250(127.95) | 1650(64.96) | 855 |
| Y axis travel: mm(inch) | ±80(3.15) | – | – | – |
| Rapid feed – X/Z axis m/min(ipm) | 20/20(787.4/787.4) 20/12(787.4/472.4) | 20/20(787.4/787.4) 20/12(787.4/472.4) | 12/15(482.4/590.6) | 18/20 |
| Rapid feed – Y axis m/min(ipm) | 7(9.4) | – | – | – |
| Feed motor – X/Z axis kW(HP) | 4/7(5.36/9.38)(a30i) 4/6(5.36/8)(a40i) | 4/7(5.36/9.38)(a30i) 4/6(5.36/8)(a40i) | 3/4(4/5.36) [opt. 3/7(4/9.38)] | 3/4(4/4) |
| Feed motor – Y axis kW(HP) | 4(5.36) | – | – | – |
| JOG feed rate mm/min(ipm) | 0~1260(0~49.6) | 0~1260(0~49.6) | 0~1260(0~49.6) | X/Z: 0~1260 |
Ball screw dia x pitch mm(inch) | 36xP10(X)[1.42xP0.39(X)] 50xP16(Z)[1.97xP0.63(Z)] 36xP10(X)[1.57xP0.39(X)] 63xP16(Z)[2.48xP0.63(Z)] 32xP10(Y)[1.26xP0.39(Y)] | 36xP10(X)[1.42xP0.39(X)] 50xP16(Z)[1.97xP0.63(Z)] 36xP10(X)[1.57xP0.39(X)] 63xP16(Z)[2.48xP0.63(Z)] – | 36xP6(X)[1.42xP0.24(X)] 50xP10(Z)[1.97xP0.39(Z)] | 36xP6(X) 50xP8(Z) |
| SPINDLE | ||||
| Sprindle nose (chuck) inch | A2-11(15″) | A2-11(15″) | A2-11(15″) | A2-11(12″) |
| Max. spindle speed rpm | 2500 | 2000 | 1500 | 2500 (opt. 2000) |
| Spindle motor power kW(HP) | 30/37(40.2/49.6) with gearbox [37/45(49.5/60) CV/YCM] | 30/37(40.2/49.6) With gearbox | 30/37(40.2/49.6) With gearbox | 22/26/35 (opt. 30/37/45 |
| Bearing inside dia. mm(inch) | 160(6.3) | 190(7.48)[220(8.7) for LSB] | 180(7.09) | 160 |
| Spindle bearing | 105(4.12) | 135(5.31)[160(6.3) for LSB] | 123(4.84) | – |
| TURRET | ||||
| No. of tools no. | 10(opt.12) (12 for VT-40CV/YCM) | 10(opt. 12) | 10(12 for CV) | – |
| No. of live tools no. | 6(12 for YCM) | – | 6 | 10(12 servo) |
| Tool shank size mm(inch) | 32(1 1/4) | 32(1 1/4) | 32(1 1/4) | 32 |
| Curvic coupling dia. mm(inch) | 250(9.84) | 250(9.84) | 320(12.6) | – |
| Max. boring bar dia. mm(inch) | 20(2)(VDI-50) | 20(2)(VDI-50) | 60(2 3/8)(VDI-50) | 50 (BMT-75) |
| Exchange time (T-T) sec. | 1 | 1 | 1 | 0.9(1.36)-adjacent 1.78(1.8)-opposite |
| Milling speed rpm | 3000 | 3000 | 3000 | |
| Milling motor kW(HP) | 7.0(9.38) | – | 7.0(9.38) | 7 |
| TAILSTOCK | ||||
| Quill dia. mm(inch) | 150(5.91) | 150(5.91) | 150(5.91) | 110 |
| Quill stroke mm(inch) | 150(5.91) | 150(5.91) | 150(5.91) | 100 |
| Quill taper | MT#5(live) | MT#5(live) | MT#5(live) | MT#5(opt.MT#4) |
| OTHER | ||||
| CNC controller (FANUC) | Oi-T | Oi-T | Oi-T | Oi-TF Plus(10.4″) |
| Tank capacity L. (gallon) | 450(118.8) 700(184.9) | 450(118.8) 700(184.9) | 350(66) | 250 (overflow type) |
| Approx. machine size (LxWxH) mm(inch) | 7.1×2.7×2.2 [279.5×82.7×86.6] 8.5×2.7×2.2 [334.6×82.7×86.6] | 7.1×2.7×2.2 [279.5×82.7×86.6] 8.5×2.7×2.2 [334.6×82.7×86.6] | 6.2×2.5×2.5 (244x118x98.4) | 4930x2029x2253(5210x2029x2253) |
| Net weight kg(lbs) | 15000(33069)[17000(37479)] 17000(37479)[19000(41888)] | 15580(34276) 17580(38676) | 13500(29700) | 9000(9100) |